· One reference sensor was a CPC (TSI, butanol-based, 50 % cut-off diameter is 4 nm), which was connected directly to the monodisperse flow after the DMA and operated at a L min −1 flow rate under atmospheric pressure. Manuals or user guides for your HP DeskJet Ink Advantage All-in-One Printer. and repair information in this manual is included for use by a qualified technician. Laser Safety The Model CPC is a Class I laser-based instrument. During normal operation, you will not be exposed to laser radiation. However, you must take certain precautions or you may expose yourself to hazardous radiation in the form of intense, focused.
This CPC counts airborne ultrafine particles (UFP) from 7 nm in diameter at an aerosol flow rate of L/min. It employs single particle counting to measure concentrations up to 50, particles/cm3. The CEN is easy to setup and operate, and data are automatically output to the CEN data string. The The SMPS consisted of an Electrostatic Classifier (EC , TSI Inc.), a Differential Mobility Analyzer (DMA , TSI Inc.), and a CPC The SMPS was used, with an aerosol/sheath flow ratio of / L·min −1, thus measuring particle number distributions in the range nm. /6 25 × 32 × 37 cm/ kg /8 31 × 16 × 28 cm/ kg *low end of particle size range determined by dMa Model specifications. **upper end of concentration specification determined by aersol neutralizers Models , a, , specifications model dmA cpc Working Fluid Range (µm) particle Size Range (µm) particle.
handling of the Model Condensation Particle Counter (CPC). There are no user-serviceable parts inside the instrument. Refer all repair and maintenance to a qualified technician. All maintenance and repair information in this manual is included for use by a qualified technician. Laser Safety The Model CPC is a Class I laser-based instrument. ) TSI Incorporated This manual contains operating instructions for the Model Particle Size Selector, an accessory for the Model , , and CPCs. The Model is a separating device that removes small particles from an aerosol while passing larger particles. radiation during normal operation of the Model , , , , or CPCs. However, you must take the following precautions to prevent exposure to hazardous optical radiation in the form of intense, focused, invisible light: Do not remove any parts from any CPC unless this manual instructs you to do so.
0コメント