Cooper 9651 installer manual






















Printed and published in the U.K. Part number Page ii 6/8/ Compliance Statements The PD control unit is compliant with EN environmental class II. The PD control unit is suitable for use in systems designed to comply with PD at . Installation Instructions Introduction The , 99keypads are designed to work with , , , 97alarm system control units. These keypads are a direct replacement for the , and offers the advantage of smaller size and improved appearance. The 99keypada have a proximity tag reader. INSTALLATION AND PROGRAMMING GUIDE HARDWIRED CONTROL PANEL. This document is an A5 booklet, 56 sides long including covers. Print black only on white 80gsm paper.


Installation Guide Cabling for Keypads and Expanders Cooper Security recommends that you use 8-core 7/ or 16/ alarm cable for wiring keypads and expanders. You can connect the keypads and expanders in either a star or bus configuration (see Figure 4). Scantronic house alarm Cooper replacement Calcaiola, 14 Feb , in forum: Alarms, CCTV Telephones Replies. Printed and published in the U.K. Part number Page ii 6/8/ Compliance Statements The PD control unit is compliant with EN environmental class II. The PD control unit is suitable for use in systems designed to comply with PD at Grade 2.


Installation Guide Cabling for Keypads and Expanders Cooper Security recommends that you use 8-core 7/ or 16/ alarm cable for wiring keypads and expanders. You can connect the keypads and expanders in either a star or bus configuration (see Figure 4). 3. Installation: this explains the tasks involved in installing an IAS using the control unit. 4. Programming: this explains how to enter and exit programming, and lists the commands available to the installer. The control unit is designed to be fully programmable to suit individual user and site requirements. Scantronic - User and Service Manuals Hardwired Control Panel Installation and Programming Guide The control unit provides 16 independent user access codes and or Scantronic “Prox” tags. The user can change these codes or add or delete “Prox” tags at any time, but cannot program the system with these codes.

0コメント

  • 1000 / 1000